[Wien] Chello nun Flatrate

Clemens Hopfer (spam-protected)
So Jun 24 17:13:14 CEST 2007


hmm,
was für eine Version der FreiFunk Firmware ist das? 
/etc/local.olsrd.conf sollte normal schon schreibbar sein

postinst überprüft, ob in /etc/local.olsrd.conf tap0 schon konfiguriert 
ist, und hängt ansonst die tap0 config an, also bleiben bereits 
vorhandene eintrage vorhanden

ist /etc/local.olsrd.conf schon vorhanden?
ist das eventuell ein softlink?


cu,
datacop

(spam-protected) schrieb:
> Bei mir gabs folgende Meldungen
>
> Connecting to dg38v1.funkfeuer.at[193.238.158.248]:80
> 0xff-openvpn-webif_1 100% |*****************************|  4128       
> 00:00 ETA
> Done.
> Unpacking 0xff-openvpn-webif...Done.
> Configuring 
> 0xff-openvpn-webif...//usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 
> 17: cannot create /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
> //usr/lib/ipkg/info/0xff-openvpn-webif.postinst: 17: cannot create 
> /etc/local.olsrd.conf: Read-only file system
>
> mfg
> Erich
>
> ----- Original Message ----- From: "Clemens Hopfer" <(spam-protected)>
> To: "FunkFeuer Wien" <(spam-protected)>
> Sent: Sunday, June 24, 2007 4:47 PM
> Subject: Re: [Wien] Chello nun Flatrate
>
>
>> hi,
>>
>> hab grad die erste Version des OpenVPN ipkg fertig bekommen, es läuft
>> momentan auf dg38v13 ohne Probleme, allerdings konnte ich noch nicht das
>> mit dem shared-secret testen und ich bin mir nicht sicher, ob das script
>> für die explizierte hostroute komplett funktioniert.
>>
>> scripts, control-dateien etc. sind hier zu finden:
>> http://dg38v1.funkfeuer.at/ipkg/dev/openvpn-webif/
>> das ipkg hier:
>> http://dg38v1.funkfeuer.at/ipkg/1.4/0xff-openvpn-webif_1.4.5_mipsel.ipk
>>
>>
>> damit die abhängigkeiten mitinstalliert werden, kann man unter System
>> bei IPKG-Quelle
>> ---cut---
>> src datacop http://dg38v1.funkfeuer.at/ipkg/1.4
>> ---cut---
>> eintragen, rebooten und 0xff-openvpn-webif über ssh bzw. Software2
>> installieren
>>
>> Ich weis, dass die scripts nicht optimal geschrieben wurden, vor Allem
>> die vielen echos nicht, aber es funktioniert bei mir.
>>
>> Ich bitte um Testberichte, damit ich es noch verbessern kann.
>>
>> cu,
>> datacop
>>
>
>
> -------------------------------------------------------------------------------- 
>
>
>
>> -- 
>> Wien mailing list
>> (spam-protected)
>> https://lists.funkfeuer.at/mailman/listinfo/wien
>>
>
>




Mehr Informationen über die Mailingliste Wien